Triumph Group selects GE Additive to help accelerate its additive journey

Munich, Germany/ Farnborough, UK – 17 July 2018 – GE Additive today announced that aerospace industry leader, Triumph Group (NYSE:TGI) has selected two of its systems, as well as a range of AddWorksTM consultancy service packages, to help further its additive manufacturing strategy.

Triumph has selected a Concept Laser M2 Cusing Multilaser DMLM system and an Arcam EBM Q20plus system to be installed at its R&D facility in Seattle with installation expected to be completed within Q3 2018.  The AddWorks team will partner closely with the team at Triumph from day one on a range of areas, including discovery workshops, materials selections through to advising on prototyping strategies.

“I really admire Triumph’s smart and progressive strategy in adopting a multimodality approach to their additive journey,” said Jason Oliver, President and CEO, GE Additive. “And when you add to that the deep experience and divergent thinking of our AddWork’s team, I look forward to seeing the results of what I hope will be a long and rewarding relationship.”

“Triumph Group is excited to work with GE Additive to broaden Triumph’s utilization of additive manufacturing technology,” said Dan Crowley, President & CEO, Triumph Group. “Thus far we have successfully used additive manufacturing for prototyping, and we are rapidly growing its use for design competency. This partnership with GE Additive will strengthen our additive manufacturing capability, accelerating our ability to design and develop future on-wing solutions for our customers.”

Triumph Group participates at all levels of the aerospace supply chain – from single components, to complex systems, to aerospace structures and their contents. The company provides solutions for the entire product life cycle of an aircraft – from engineering and design to aftermarket service. Its unique ability to integrate a broad range of products and capabilities is its competitive advantage.

From left to right: Gary Tenison, Triumph Group, VP Strategy and Business Development; Jason Oliver, GE Additive, President and CEO; Dan Crowley, Triumph Group, President and CEO; David Joyce, GE Aviation, President and CEO; Tom Holzthum, Triumph Integrated Systems, Executive Vice President; Ryan Martin, GE Additive, Sales Leader Americas.

Media Statement: Triumph Announces Facility Consolidation as part of Company-wide Transformation

Triumph Announces Facility Consolidation as part of Company-wide Transformation

As previously announced in May 2016, Triumph Group is undergoing a transformation to proactively position the company for long-term success and enhance the company’s performance and competitiveness in the marketplace.

Since the appointment of the new CEO, Dan Crowley, Triumph Group has taken a number of actions to implement a new, performance-based operating philosophy, under “One Triumph.” These actions enable the company to better leverage its scale, more efficiently meet customer commitments and improve performance.

As part of this transformation, Triumph Group has made the following announcements:

  • On July 10, 2018 Triumph Group announced it will close its Triumph Airborne Structures dba Triumph Interiors facility in Grand Prairie, Texas on or about December 31, 2018. Work performed at the at the Triumph Interiors Grand Prairie site will be transferred to other Triumph facilities.
  • On August 2, 2017 Triumph Group announced it is expected to cease operation at Triumph Thermal Systems – Maryland, Inc. in Frederick, Maryland on or about December 2018*. Work performed at the Thermal Systems – Maryland location will be transferred to other Triumph facilities.
  • On October 28, 2016 Triumph Group announced it is expected to cease operations at Triumph Structures – East Texas, Inc. in Kilgore, Texas on or about September 2018*. Aerospace and defense work performed at the East Texas location will be transferred to other Triumph Precision Components.  All options are being considered for the remaining business of non-aerospace and defense work at the Kilgore, Texas site.
  • On October 24, 2016 Triumph Group announced it will close its Triumph Structures – Long Island, LLC in Westbury, New York on or about December 2018. On March 28, 2018 Triumph Structures – Long Island, LLC was sold to Aero Structures Long Island, Inc.
  • On September 20, 2016 Triumph Group announced it is consolidating the work being done at its three Triumph Actuation Systems – Connecticut locations (East Lyme, Bloomfield and Bethel) into a single, state-of-the-art, full service Triumph facility in Windsor, Connecticut. The transfer of employees and work to Windsor, and closure of the three facilities will occur in phases, beginning in December 2016 through on or about March 31, 2017.
  • On July 25, 2016 Triumph Group announced it will close its Triumph Interiors, LLC-Oakdale facility in Oakdale, Pennsylvania, on or about March 31, 2017. Work performed at the Oakdale location will be transferred to other Triumph facilities.
  • On July 7, 2016 Triumph Group announced it will close its Triumph Structures-Everett Inc., facility in Everett, Washington, on or about March 31, 2017. Work performed at the Everett location will be transferred to other Triumph facilities.

Triumph Group is working closely with its employees, top suppliers and customers during this time.

*Revised date

MEDIA STATEMENT – PDF

 

 For information, email media@triumphgroup.com

Triumph Achieves Elite Supplier Status From Lockheed Martin RMS

BERWYN, Pa. – March 19, 2018 –Triumph Group, Inc. (NYSE:TGI) announced today that its Triumph Fabrications company located in Hot Springs, Arkansas was recognized by Lockheed Martin Rotary and Mission Systems (RMS) for exceptional supplier performance in support of their Sikorsky Aircraft business. Triumph Fabrications achieved RMS Elite Supplier status after demonstrated improvements in both quality and delivery performance. Triumph Fabrications, a Triumph Aerospace Structures operating company, produces complex hydroform and stretchform sheet metal components for Sikorsky’s UH-60 Black Hawk platform.

TGI Credits Multifaceted Engagement for Improvements at Red Oak Site

SCOTTSDALE, Ariz. – December 6, 2017 – The president of Triumph Group’s Aerospace Structures – Red Oak, Allen Vyce, participate in the 2017 American Aerospace & Defense Summit. The event sponsored by Generis, brings together leaders from many aerospace and defense OEMs and Tier 1 supplier companies, providing a platform to:

– Discuss strategies to optimize manufacturing and R&D in American aerospace and defense
– Drive innovation in a competitive landscape
– Maximize supplier relationships
– Mitigate costs, identify growth opportunities and build quality throughout your system.

Allen’s presentation Turning Passion into Profit:  How Driving Operational Excellence and Investing in People will be the Best ROI in 2018 focused on leadership, employee and customer engagement initiatives, and its impact on product quality and company culture.

“Although it’s clear that our operational excellence initiatives at Triumph Red Oak are delivering results, we’ve just started our journey,” said Vyce as he addressed the audience. “Key enablers to our future success are leadership engagement and relentless focus on first-time quality in everything we do, and our leadership team is committed to these objectives,” he continued.

Videos highlighting both employee and customer perspectives on Triumph Group’s One Company transformation were well-received by the group, and many summit participants provided positive feedback regarding the company’s improvement journey.

Other speakers at conference were Sonal Deshpande, VP, Mission Assurance for Northrop Grumman Mission Systems; Wayne Brown, VP, Quality and Mission Assurance for Raytheon Missile Systems; Shubhayu Chakraborty, President of Meggitt Performance Sensing; Dr. Alexander Eksir, VP Supplier Quality for United Technologies Corporation; and John O’Leary, VP & GM, Airbus Americas Engineering, Inc.

More than 24 aerospace and defense OEMs and supplier attended the event, who key themes focused around Manufacturing and Supply Chain, Supplier Oversight and Cost Optimization; Workforce Management; and Product Innovation.

“It was privilege to have the opportunity to tell our story in front of our peers at the American Aerospace & Defense Summit,” said Vyce.  “The event provides a unique opportunity for participants to share and learn from one another on topics most relevant to aerospace and defense manufacturing companies today.”