Accessory gearboxes are a complex application used to distribute power to hydraulic, pneumatic, electrical, lubrication and other flight systems. These products are verified for flow, pressure, contact patterns and cleanliness before shipment.

Accessory Gearboxes

Manufacture, test and assembly of complete gearbox and transmission assemblies as well as complex gears and housings.

TRIUMPH GEARED SOLUTIONS - MACOMB

The Accessory Gearbox produces Hydraulic and Electrical power. Other Engine accessories such as starters, generators, fuel pumps, hydraulic pumps, oil pumps, speed sensors, etc. are also driven by the AGB. The Transfer and Inlet Gearboxes work in conjunction to provide power to the engine.

Accessory, Transfer and Inlet Gearbox

Accumulators 

We Design, Manufacture, Assemble and Test Hydraulic Actuation Components for the Aerospace Industry.

TRIUMPH ACTUATION PRODUCTS & SERVICES - VALENCIA

Hydraulic Equipment

Group 109.svg

Actuation

Landing Gear Actuation

At TRIUMPH Geared Solutions, we offer proven experience and expertise in aircraft utility actuation components and systems. This diverse experience includes engine thrust reverser deployment, landing gear deployment, cargo and passenger door operation, radar antenna drives and in-flight refueling boom positioning. Other applications developed by TRIUMPH Geared Solutions include pilot seat positioning, fighter canopy opening and wing-fold systems for carrier aircraft.

Utility Actuation Components and Systems

Utility Actuation

Helicopter Actuation

Actuation Controls

Electrical Control Solutions

Aircraft employ actuators for many types of functions, from opening and closing fan cowl hoods to thrust reversers. TRIUMPH Accessory Services - Grand Prairie has the capability to service ball-screw and hydraulic actuators.

Actuators

ControlCables.svg

Air Cycle Machine

The TP85‐8 Air Drive Unit (ADU), also referred to as a Pneumatic Drive Turbine assembly, provides supplementary hydraulic power for the hydraulic system of an aircraft experiencing high load conditions. The turbine assemblies will also provide emergency hydraulic power should the engine‐driven hydraulic pumps onboard the aircraft fail to operate. The TP85‐8 ADU is driven by bleed air from the aircraft engine and is controlled by a three‐position control switch in the cockpit.

TP-85-8 Air Drive Unit

Group 32.svg

Air Drive Units

Based in West Hartford, Connecticut, TRIUMPH Systems, Electronics & Controls, is a leading independent aerospace fuel system supplier for the commercial, military, helicopter and business jet markets. Employing approximately 550 employees, the company’s key products and services include electronic engine controls, fuel metering units and main fuel pumps for both the OE and aftermarket/spares end markets.

TRIUMPH SYSTEMS ELECTRONICS & CONTROLS - WEST HARTFORD

Turbine Gearbox Assembly, Air Turbine Drive

DampersSnubbers.svg

Air Turbine Drive

Includes Heat Exchangers, Landing Gear components, Power Transfer Units (PTU), Actuators, Precooler Covers, Mufflers, Engine Mounts, etc.

Aircraft Components

Airframe mounted accessory drives (AMADs) — Every TRIUMPH Geared Solutions accessory drive is built to the highest standards of precision and reliability. The AMAD provides power for the aircraft’s hydraulic pumps, auxiliary fuel pumps and electrical generators. It also provides engine starting capability by transmitting power from auxiliary power units. Our AMADs incorporate carburized and ground gearing and, if the specification requires, AGMA Class 14 standards. Each drive is designed for high power density to minimize weight. Special features such as self-pressurizing lubrication systems assure proper operation at all altitudes within a given flight envelope. The AMADs also contain a disconnect feature which allows ground crews to disconnect the unit for maintenance and performance of electronic and hydraulic systems checks without the engine running.

Airframe Mounted Gearboxes (AMAD)

Airframe Mounted Gearboxes

TRIUMPH Geared Solutions is the premier independent supplier for the design and manufacture, as well as aftermarket spare parts and repair/overhaul support, of commercial & defense aerospace gearing components and Integrated gearboxes for fixed wing, rotorcraft, aircraft engine and ground vehicle applications. We collaborate with customers to provide a full array of capabilities including design, engineering and manufacturing of complex mechanical assemblies and build-to-print for highly specialized applications.

TRIUMPH GEARED SOLUTIONS - Park City

Gearbox System Design, Build, Overhaul

Build To Print Solutions

Antenna Deployment and Stow

The Autofeather Unit (AFU), is mounted on the engine’s un-pressurized engine compartment, provides torque signal conditioning, automatic propeller feathering and remote engine uptrim command for Take-Off operations, as well as engine output torque indication to the aircraft cockpit during all engine operating conditions.

AFU 300 Auto Feather Unit

Group 114.svg

Autofeathering prop controls

Auxiliary Power Gearboxes

Bespoke Control Solutions

Wire ropes with customized end fitting, or MS Standard Wire Ropes

Group 84.svg

Bespoke wire rope solutions

TRIUMPH SYSTEMS ELECTRONICS & CONTROLS - VILLENEUVE LE ROI, FRANCE

Mechanical Control and Actuation Solutions

Blade Fold Systems

Toilet Assemblies, Vacuum Generators, Flush Valves

FuelPumps.svg

Blue Water Products

Brake Valve Assembly

Engine Mounted Gearboxes

Power Take-off Boxes (IGBs)

Inlet Gearbox

Propeller Gearbox

Gears

Housings

Gear Solutions

TRIUMPH specializes in cable controls which are mechanical connections between controls and actuation systems used in a variety of applications. Our systems provide higher reliability, lighter weight, and greater control box selection. Current controls include wire rope, push-pull controls, sliding friction controls, ball-bearing controls and low-resistance and backlash mechanical control system cables. 

```
```
Wire Rope Controls: Wire Rope is used in applications where weight is critical, and the system operates in tension only. Assemblies are built to your required standards with unlimited configuration capabilities. ​Sliding Friction Controls: High load capacity in tension and compression​. Flexible in any direction​, wide temperature range​ and easy installation​. No adjustment or lubrication needed during the life​ of the control. Ball Bearing Controls: Ball Bearing controls are a self-contained system that performs linear motion under tension or compression loads.​Precise and accurate movement​ with high load capacity​ offering weight savings​, low friction and high efficiency​. Quick disconnect ends available​.

Cable Controls

Provides mechanical solutions including design, development, manufacturer and support of highly engineered mechanical controls and components as well as production of complex mechanical assemblies using external designs for fixed wing and rotary commercial and military aircraft, naval vessels, military vehicles, nuclear power stations and industrial plants. Control cable applications include; vent, engine control, thrust reversers, and potable/waste water system controls.

TRIUMPH SYSTEMS ELECTRONICS & CONTROLS - Heiligenhaus

TRIUMPH SYSTEMS ELECTRONICS & CONTROLS - SHELBYVILLE

TRIUMPH SYSTEMS ELECTRONICS & CONTROLS - NORTH WALES

Cargo Door Actuation

The Cargo Ramp Lift Actuator has integral retract locking capabilities and is used to lift the CH47 Cargo Ramp.

Cargo Ramp Lift Actuator

Cargo Ramp Actuation

Clemmons site designs, manufactures and supports hydraulic actuation and power generation products for the military and commercial aerospace industries.

TRIUMPH ACTUATION PRODUCTS & SERVICES - CLEMMONS

- Manufacturer: Zeiss 
- Measurement System: Renishaw PH10 
- Working Bed Volume: 1,5 meters by 1,2 meters by 0,9 meters (5 feet by 4 feet by 3 feet)

TRIUMPH Mechanical Solutions produces cockpit controls and quadrants specifically designed to meet unique customer requirements. Our Electro-Mechanical Cockpit modules are frequently married to our push/pull controls to produce combined output devices.  For example, a throttle quadrant with switch/transducer outputs and mechanical cable connections to an engine control system.

Cockpit Controls

Complete Landing Gear System Design, Build and Test

Vehicle Landing Gear System Design and Build

Composite ECS Ducting

Other Composites and Thermoplastics Capabilities

Interior Solutions

Handles, quadrant, controls boxes. Tailor made solutions to fit in customers cockpit.

Control Boxes

TRIUMPH specializes in cable controls which are mechanical connections between controls and actuation systems used in a variety of applications. Our systems provide higher reliability, lighter weight, and greater control box selection. Current controls include wire rope, push-pull controls, sliding friction controls, ball-bearing controls and low-resistance and backlash mechanical control system cables. Wire Rope Controls: Wire Rope is used in applications where weight is critical, and the system operates in tension only. Assemblies are built to your required standards with unlimited configuration capabilities. ​Sliding Friction Controls: High load capacity in tension and compression​. Flexible in any direction​, wide temperature range​ and easy installation​. No adjustment or lubrication needed during the life​ of the control. Ball Bearing Controls: Ball Bearing controls are a self-contained system that performs linear motion under tension or compression loads.​Precise and accurate movement​ with high load capacity​ offering weight savings​, low friction and high efficiency​. Quick disconnect ends available​.

Control Cables

Cargo Door System 

Ramp Door Control Valve

Control Valves

Group 110.svg

Controls

Cooling Loops And Pumps

Thermal Solutions

The Thrust Reverser Cowl Actuator (inboard) is a single-acting actuator used to open the thrust reverser cowl door on the 737 MAX engine nacelle. It includes integral extend locks which hold the door open once the actuator is extended. The actuator has one port for extension with retraction being accomplished by the cowl door weight.

Thrust Reverser Cowl Actuator (inboard)

Cowl Opening Actuator

TRIUMPH has manufactured over 100 Detector Drive Systems for PWR (pressure water reactor) and BWR (boiling water reactor) nuclear power stations worldwide and is committed to supporting the industry through innovative new system designs, retro-fit kits, spare parts, and on-going technical assistance.​ert text here. We also offer Mag-Iso valves which can be incorporated as an after-market addition to some DDS configurations or included as an à la carte offering for some DDS configurations of utilities considering a new installation(s).​

Nuclear Flus Mapping (Detector Drive Systems)

Group 115.svg

Detector Drive Units

Directed Energy

Special Mission Pod Cooling System Solutions

The Directional Control Valve is a 3-Way, 2-Position spool sleeve valve that is normally biased control (C1) to return (RTN). The valve is commanded to route flow/pressure from the PRS port to C1 by energizing a 28 Vdc nominal solenoid.

Directional Control Valve

Door Snubber

Ejection Seat Pitch Stabilization Control

Group 34.svg

The EMC-100 is dual channel Full Authority Digital Engine Control (FADEC) system, designed for helicopter turboshaft engines. The electronic control unit’s (ECU) primary channel provides precise engine power management and rotor speed control throughout the operational range of the engine. The reversionary backup channel provides full mission capability should a primary system failure occur.

Electronic Engine Controls - FADEC

Motor Controls

Integrated Cyber Protection Control Solutions

Test and Certification Capabilities

EMC-100 Electronic Control Unit

Electrical Control Units

Rotary Electromechanical Actuator and Controller High Frequency Response Motion Control

Electrical Mechanical Actuation

Landing Gear & EMA-Systems Engineering, Design, Development, Test, Manufacture and Assembly

TRIUMPH ACTUATION PRODUCTS & SERVICES - SEATTLE

Arresting Hook System 

End of Stroke Damper

End of Stroke Damper

This Engine Driven Pump is a variable displacement pump which extracts mechanical power from the gearbox accessory pad and converts it into hydraulic power available for use by the various actuators and other consumers on the AH-64 Apache aircraft. The maximum displacement of the pump is 0.182 CIPR and it is capable of providing 6 gpm of flow.

Engine Driven Pumps

Hydraulic Power Generation & Pumps

A Plate Fin Heat Exchanger utilizes solid plates to conduct heat from one fluid flow path to heat transfer fins which then transfer heat to a second fluid. The heat transfer fin and plate construction add to the structural integrity of the heat exchanger, enabling it to withstand high pressures.

Engine Fuel Oil Heat Exchanger

Based in Forest, OH, with a satellite shop in Shelbyville, IN, TRIUMPH SEC, engineers, manufactures, tests and qualifies mission critical thermal and fluid management products, and provides aftermarket services for the most demanding aerospace and defense applications. Established in 1929, we are a worldwide manufacturer who believes in partnering with our Customers to integrate Advanced designs that meet or exceed their requirements and expectations. 

TRIUMPH SYSTEMS ELECTRONICS & CONTROLS - FOREST

The EFP-630 or Engine Fuel Pump, is a combined high speed centrifugal main fuel pump and afterburner fuel pump system which delivers both gas generator and afterburner fuel flow. The main fuel pump consists of two centrifugal impellers in series for supplying gas generator flow. The afterburner fuel pump consists of a single centrifugal impeller and modulating throttle valve for supplying afterburner flow.

EFP-630 Engine Fuel Pump

Engine Fuel Pump

Engine mounted accessory drives (EMADs) — Our EMADs are manufactured with care and precision, using TRIUMPH Geared Solutions or customer designs to meet the engine manufacturers’ specifications. Low profile casings help minimize engine frontal area and facilitate engine installation. EMADs provide power for fuel pumps, alternators, and lubricant and scavenge pumps. TRIUMPH Geared Solutions contributes to prototype EMAD design and manufacture, such as for the F119 and YF120 engines. Triumph Geared Solutions EMADs have also gone into service on many military and civilian engines.

Engine Mounted Gearboxes (EMADs)

It contains the oil pump, the scavenge and pressure inlet strainers, scavenge return connection, pressure outlet ports, an oil filter, and mounting bosses for the oil pressure gauge and temperature bulb connections.

Engine Oil Tank

Flap Actuation Control Levers

Roller bearing controls, delivering linear motion between two points thru complex Airframe

Flexible captured ball bearing control cables

Flight Control Actuation

Flight Control Cables

Flight Controls, PAX and Cargo doors, MLG & NLG Doors

Nacelles.svg

Flight Controls and Airframe Structures

Fuel flow transmitters measure the flow rate of fuel through the component. As more fuel is flowed, more torque is applied to a turbine assembly. This torque creates distance between two magnetic pick-off’s which in turn creates distance between the electrical signal generated. The electrical signal is interpreted by a computer and a fuel flow rate is calculated.

Fuel Flow Transmitter

A fuel/oil heat exchanger and associated equipment is provided to maintain the hot engine oil in heat exchange relationship with the cool engine fuel.

Fuel Heat Exchanger

Fuel Metering/Hydromechanical Units

Fuel Solutions

Aircraft fuel pumps are designed to move a significant volume of fuel from the tanks to the engine by way of the fuel system. They are shaft powered, employ a variety of motive means and require specialized test equipment to verify proper flow rates and volumes.

Fuel Pump

The MFP-570 provides main engine burn flow as well as servo flow and engine actuator flow. This two-stage “cartridge type” fuel pump is designed to be inserted directly into the engine fuel metering unit.

MFP-570 MAIN FUEL PUMP

Fuel Pumps (Fighter Afterburner and Main Engine Pumps, Helicopter Fuel Pumps)

FuelSolutions.svg

Helicopter FADECs

Fueldraulic Engine Actuation 

Test Capabilities

The Forward and Aft Engine Mounts are the components that attach and secure the Engine to the Wing Pylon. These Mounts are comprised of critical subcomponents that ensure the safety and reliability of the entire assembly.

FWD and AFT Engine

Gear Boxes

NewGroupe10.svg

Gearbox

Starter Generators, APU Generators, Main Generators (AC and DC), VSCF (Backup) Generators

Generators

Ground Spoilers

Ground Spoiler Actuator

Gun Drive Unit

Group 116.svg

Heat Exchangers (Plate-Fin, Tube In-Shell, Conformal)

Heat Exchangers, Oil Coolers, Precoolers, Reheaters, Condensers

Heat Transfer

Upper Boost Actuators

Rotor Brakes

Tail and Skid Bumpers

Main Rotor Lag Dampers

Helicopter Collective Stick

High Lift Actuation

Hinges

TRIUMPH is a recognized provider of telescoping hold open rods as well as fixed-length struts. These products range from simple rods to complex assemblies with single- or dual-action release collars, hydraulic damping in one or both directions, and fixed mono balls, or universal joint fittings. These products are mainly used to keep fan cowls, radomes, doors, thrust reversers, and maintenance panels in the open position.

Hold Open Rods

TRIUMPH Geared Solutions is a world leader in flight trim control, with a special focus on horizontal stabilizer trim actuation. Since 1955, TRIUMPH Gear Systems has designed, verified, manufactured and supported horizontal stabilizer trim actuators for six out of ten of the large commercial transport aircraft developed in the United States, including every large U.S. military transport. We are highly experienced in applying the key functional and structural elements that make horizontal stabilizer trim actuators some of the most challenging and critical items on an aircraft.

Horizontal Stabilizer Trim Actuator (HSTA)

HSTA

Hydraulic Cooling System

Group 113.svg

Hydraulic Rate Fuses 737 NG, 737 Max, 777/777X, 767, 747,KC-390

Hydraulic Fuses

Reservoirs

Manifolds

Hydraulic Solutions

Industry leader in aerospace hydraulic landing gear, landing gear door, and utility system actuation, as well as the industry leader in hydraulic fuses.

TRIUMPH ACTUATION PRODUCTS & SERVICES - YAKIMA

Arresting Hook System 

Hydraulic Isolation Valve

Hydraulic Isolation Valves

This hydraulic motor (also known as “Hydrive”) is a bi-directional, fixed displacement axial piston device which extracts energy from high pressure hydraulic fluid and transforms it into torque available at the output shaft. It is used on the General Dynamics Ordnance and Tactical Systems (GD-OTS) JSF gun system.

Hydraulic Motor

The reservoir is a tank in which an adequate supply of fluid for the system is stored. Fluid flows from the reservoir to the pump, where it is forced through the system and eventually returned to the reservoir.

PRODUCTS CATALOG

PRODUCTS BY PLATFORM

PRODUCTS BY CATEGORY